|
|
Basic Information |
||
|
Name |
Ming-Wei Wu |
|
Gender |
Male |
||
Title |
Assistant Professor |
||
Tel |
+886-5-6315486 |
||
|
|||
|
Experiencess & Specialty |
|
Education |
M.S. in Materials Science and Engineering, National Taiwan University Ph. D in Materials Science and Engineering, National Taiwan University |
Expertise and Research Interests |
Powder Metallurgy, Material Analysis, Ceramic Processing, Mechanical Properties, Transparent Conductive Oxide, Thermodynamic Simulation |
Experiencess |
R&D Engineer, Solar Applied Materials Technology Corporation
Post-Doctoral Research Associate, Department of Material Science and Engineering, National Taiwan University |
曾執行之計畫(國科會及各種產學計畫) |
||
補助或委託機構 |
起迄年月 |
計畫名稱(計畫編號) |
略 |
略 |
略 |
Publication |
|
Journal Papers |
|
1 |
M. W. Wu and K. S. Hwang*, “The Formation and Strengthening Mechanisms of Weak Nickel-rich Areas in Powder Metal Steels”, submitted to Materials Science and Engineering A (SCI) |
2 |
M. W. Wu*, K. S. Hwang, and K. H. Chuang, “Improved Distribution of Nickel and Carbon in Sintered Steels through the Addition of Chromium and Molybdenum, Powder Metallurgy, 2008, vol. 51, no. 2, pp. 160-165. (SCI) |
3 |
M. W. Wu, K. S. Hwang*, and H. S. Huang, “In-Situ Observations on the Fracture Mechanism of Diffusion Alloyed Ni-Containing PM Steels and a Proposed Method for Tensile Strength Improvement”, Metallurgical and Materials Transactions A, 2007, vol. |
4 |
M. W. Wu and K. S. Hwang*, “Improved Homogenization of Ni and C in Sintered Steels Through the Use of Cr-Containing Prealloyed Powders”, Metallurgical and Materials Transactions A, 2006, vol. |
5 |
M. W. Wu, K. S. Hwang*, H. S. Huang, and K. S. Narasimhan, “Improvements in Microstructure Homogenization and Mechanical Properties of Diffusion Alloyed Steel Compact by the Addition of Cr-containing Powders”, Metallurgical and Materials Transactions A, 2006, vol. |
6 |
K. S. Hwang, M. W. Wu, and C. C. Tasi, “High Strength Sinter-Hardening Powder Metallurgy Alloys”, Advanced Materials Research, 2008, vol. 51, pp 3-9. (EI) |
7 |
K. S. Hwang, M. W. Wu, F. C. Yen, and C. C. Sun, “Improvement in Microstructure Homogeneity of Sintered Compacts through Powder Treatments and Alloy Designs”, Materials Science Forum, 2007, vol. 534-536, pp. 537-540. (EI) |
8 |
吳明偉、黃坤祥,”粉末冶金鋼中合金元素之均質化與顯微組織的改良”,粉末冶金會刊,2007年,32卷4期,206-213頁。 |
9 |
吳明偉、黃坤祥、黃宏勝,“Fe-4Ni |
10 |
吳明偉、黃坤祥、黃宏勝,“Fe-4Ni |
Conference Paper |
|
1 |
M. W. Wu and K. S. Hwang, “The Mechanisms of the Formation and Elimination of Weak Ni-rich Areas in PM Steel”, Advances in Powder Metallurgy and Particulate Materials, MPIF, |
2 |
K. S. Hwang and M. W. Wu, “Sinter-Hardened Ultrahigh-Strength PM Steels with Homogeneous Alloying and Microstructures”, Advances in Powder Metallurgy and Particulate Materials, MPIF, |
3 |
M. W. Wu, K. S. Hwang, and H. S. Huang, “Identifications of Crack Initiation Sites of Ni-Containing Steels and Methods for Property Improvement, Advances in Powder Metallurgy and Particulate Materials, MPIF, Princeton, NJ, 2006, part. 5, pp. 58-71. (EI) |
4 |
K. S. Hwang, M. W. Wu, F. C. Yen, and C. C. Sun, “Improvement in Microstructure Homogeneity of Sintered Compacts through Powder Treatments and Alloy Designs”, 2006 Powder Metallurgy World Congress & Exhibition |
5 |
M. W. Wu, K. S. Hwang, and H. S. Huang, “The Effect of Cr and Mo Additions on the Improvement in Microstructural Homogeneity and Mechanical Properties of Ni-containing P/M Steels”, 2006 Powder Metallurgy World Congress & Exhibition |
6 |
M. W. Wu, H. S. Huang, and K. S. Hwang, “The Mechanical Properties and Microfracture Mechanism of Sintered Fe-4Ni-1.5Cu-0.5Mo Powder Compacts“, 2005 Cross-strait P/M conference, Nantou, Taiwan, R. O. C, 2005 |
7 |
M. W. Wu and K. S. Hwang , “The Microfracture Mechanism of P/M Low-Alloyed Steel”, the Annual Conference of the Chinese Society for Materials Science, Hsinchu, Taiwan, R. O. C., 2004 |
8 |
黃坤祥、吳明偉、蔡嘉正,”High Strength Sinter-Hardening Powder Metallurgy Alloys”,2007第三屆海峽兩岸工程材料研討會。 |
9 |
吳明偉、黃坤祥,”粉末冶金鋼中合金元素之均質化與顯微組織的改良”,2007海峽兩岸粉末冶金研討會論文集。 |
10 |
黃坤祥、吳明偉,“經由合金均質化與顯微組織的改進而具超高強度之燒結硬化型合金”,96年度中華民國粉末冶金年會。 |
Invited publication for a chapter paper |
|
|
略 |
技術報告及其他 |
|
1 |
K. S. Hwang and M. W. Wu, “Sintering studies of Cr-containing P/M steels”, Contract No: 91-S-A57 (Hoeganaes Corporation, USA) |
2 |
黃坤祥、吳明偉,國科會補助提升產業技術及人才培育研究計畫成果報告,“粉末冶金含鉻高強度合金鋼之燒結製程及成品之機械性質”,計畫編號: NSC 91-2622-E-002-028-CC3 (連鴻企業股份有限公司) |
3 |
黃坤祥、吳明偉,國科會補助提升產業技術及人才培育研究計畫成果報告,“添加磷化物對燒結件密度及機械性質之影響”,計畫編號: NSC 93-2622-E-002-020-CC3 (連鴻企業股份有限公司) |
4 |
黃坤祥、吳明偉,國科會補助提升產業技術及人才培育研究計畫成果報告,“脫脂殘留碳之形態及其對乾壓與射出成形工件機械性質之影響”,計畫編號: NSC 93-2216-E-002-0040 (台耀科技股份有限公司,兩年期) |
5 |
黃坤祥、吳明偉,國科會補助提升產業技術及人才培育研究計畫成果報告,“燒結硬化型合金機械性質之提升研究”,計畫編號: NSC 94-2622-E-002-008-CC3 (連鴻企業股份有限公司) |
6 |
黃坤祥、吳明偉,國科會補助提升產業技術及人才培育研究計畫成果報告,“Cr對含Ni燒結硬化合金鋼中鎳及碳之均質化及機械性質之影響”,計畫編號: NSC 95-2622-E-002-023-CC3 (連鴻企業股份有限公司) |
Other Activities |
|
|
略 |
International conference papers |
|
1 |
PowderMet2007 - The MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials, 2007, Denver (Oral paper) |
2 |
PowderMet2008 - The MPIF/APMI International Conference on Powder Metallurgy & Particulate Materials, 2008, DC |
Academic Groups |
|
|
略 |
Academic Awards |
|
1 |
2005 P/M METALLOGRAPHY COMPETITION, 2nd Place in the R&D Category, held in conjunction with the 2005 International Conference on Powder Metallurgy&Particulate Materials, Montreal, U. S. A. |
2 |
中華民國粉末冶金協會95年度論文獎 |
Supplements |
|
1 |
申請中專利:含硼靶材及其製作方法、薄膜、磁紀錄媒體 (Method for producing sputtering target containing boron, thin film and magnetic recording media) |