Jiing-Herng Lee, Pi-Chuen Tsai*, Jyh-Wei Lee, “Cyclic Oxidation Behavior and Microstructure Evolution of Aluminized, Pt-aluminized High Velocity Oxygen Fuel Sprayed Sprayed CoNiCrAlY coatings,” Thin Solid Film (2009), doi:10.1016/j.tsf.2009.03.148.
2
Pi-Chuen Tsai, Wen-Jauh Chen, Jun-Hao Chen,Chi-Lung Chang, “Deposition and Characterization of TiBCN Films by Cathodic Arc Plasma Evaporation,” Thin Solid Film (2009), doi:10.1016/j.tsf.2009.03.029.
3
Chi-Lung Chang, Chao-Te, Pi-Chuen Tsai, Wei-Yu Ho, Da-Yung Wang, “Mechanical and Corrosion Properties of (Ti,Si)N Coatings Synthesized by Cathodic Arc Plasma Evaporation,” Surface and Coatings Technology, 202 (2008) 5516–5520. (SCI)
Pi-Chuen Tsai, Yen-Fei Hwang, Jueh-Yu Chiang, Wen-Jauh Chen, “The Effects of Deposition Parameters on the Structure and Properties of Titanium-containing DLC Films Synthesized by Cathodic Arc Plasma Evaporation,” Surface and Coatings Technology, 202 (2008) 5350–5355. (SCI)
6
Chi-Lung Chang, Wei-Chih Chen, Pi-Chuen Tsai, Wei-Yu Ho, Da-Yung Wang, “Characteristics and performance of TiSiN/TiAlN multilayers coating synthesized by cathodic arc plasma evaporation,” Surface and Coatings Technology, 202 (2007) 987-992. (SCI)
7
Chi-Lung Chang1, Chao-Te Lin, Pi-Chuen Tsai,Wei-Yu Ho, Da-YungWang, “Influence of bias voltages on the structure and wear properties of TiSiN coating synthesized by cathodic arc plasma evaporation, ” Thin Solid Films (in press), 2007, doi:10.1016/j.tsf.2007.07.087. (SCI)
8
Pi-Chuen Tsai, Jiing-Herng Lee, Chi-Lung Chang, “Improving the Erosion Resistance of Plasma-sprayed Zirconia Thermal Barrier Coatings by Laser Glazing, ” Surface and Coatings Technology, 202 (2007) 719–724. (NSC 95-2221-E-150-026) (SCI)
9
Pi-Chuen Tsai, Jueh-Yu Chiang and Yen-Fei Hwang, “Characteristics and Mechanical properties of Titanium-containing Diamond Like Carbon Films Deposited by Cathodic Arc Evaporation”, Journal of Nanoscience and Nanotechnology, 8 (2008) 2516-2521. (SCI)
10
Pi-Chuen Tsai, Kuei-Hsien Chen, “Evaluation of Microstructures and Mechanical Properties of Diamond Like Carbon Films Deposited by Filtered Cathodic Arc Plasma”, Thin Solid Films, 516 (2008) 5440-5444. (SCI).
11
P. C. Tsai, “The Deposition and Characterization of BCN Films by Cathodic Arc Plasma Evaporation,” Surface and Coatings Technology, 201 (2007) 5108-5113.
12
P. C. Tsai, J. H. Lee, C. S Hsu,“Hot Corrosion Behavior of Laser-glazed Plasma-sprayed Yttria-stabilized Zirconia Thermal Barrier Coatings in the Presence of V2O5,” Surface and Coatings Technology, 201 (2007) 5143-5147.
13
J. W. Lee, P. C. Tsai, C.K. Huang, M.C. Liu, B.T. Lai, “Hot corrosion properties evaluation of aluminized Hastelloy X with different bond coatings,” Journal of Chinese Corrosion Engineering, 2005, Vol.19, No.1, PP. 41~52.
14
P. C. Tsai, C. S. Hsu, “High Temperature Corrosion Resistance and Microstructural Evaluation of Laser-glazed Plasma-sprayed Zirconia/MCrAlY Thermal Barrier Coatings,” Surface and Coatings Technology, 2004, 183, pp. 29-34.
15
Chen-Sheng Hsu, Pi-Chuen Tsai, Kuan-Hong Lin, and Shun-Tian Lin, "Tungsten Heavy Alloys in the Incipient Stage of Liquid Phase Sintering", Advances in Powder Metallurgy, 2000, Vol.8, pp. 165-173.
16
Chen-Sheng Hsu,Pi-Chuen Tsai, and Shun-Tian Lin, "Segregation of Mo atoms to the Liquid-Solid Interfaces in Liquid Phase Sintering of W-8 pct Mo-7 pct Ni-3 pct Fe",Metallurgical and Materials Transactions A, 2001, 32A, 1, pp. 95-102.
17
H. L. Tsai, P.C. Tsai, “Laser Glazed Plasma Sprayed Zirconia Coatings”, J.Mater. Eng. and Perform., 7, 1998, pp. 258-264.
18
H. L. Tsai, P. C. Tsai, “Microstructure and Properties of Laser Glazed Plasma Sprayed (ZrO2-YO1.5)¤(Ni-22Cr-10Al-1Y) Thermal Barrier Coatings in Cyclic Oxidation Test,”J. Mater. Sci. and Perform., 4, 1995, pp. 689-896.
19
H. L. Tsai , P. C. Tsai, “Performance of Laser Glazed Plasma Sprayed (ZrO2-12wt%Y2O3)¤( Ni-22Cr-10Al-1Y) Thermal Barrier Coatings in Cyclic Oxidation Test,”Surface and Coatings Technology, 71, 1995, pp. 53-59.
20
H. L. Tsai, P. C. Tsai, 1993, "Thermal Cyclic Response of laser Glazed Plasma Sprayed (ZrO2-19.5 wt. %Y2O3)/(Ni-22Cr-10A1-1Y) Thermal Barrier Coatings," Materials Science and Engineering, A177, pp. 227-232.
21
P. C. Tsai, H. L. Tsai, David C. Tu, 1993, "Study of Processing Variables in laser Glazing Plasma-sprayed Thermal Barrier Coatings," Materials Science and Engineering, A165, pp.167-173.
22
H. L. Tsai, P. C. Tsai, David C. Tu, 1993, "Characterization of laser Glazed Plasma Sprayed Yttria Stabilized Zirconia Coatings," Materials Science and Engineering, A161, pp. 145-155.
研討會論文
1
Jiing-Herng Lee, Pi-Chuen Tsai*, Jyh-Wei Lee, “ Cyclic Oxidation Behavior and Microstructure Evolution of Aluminized, Pt-aluminized HVOF Sprayed CoNiCrAlY coatings,” The 4th International Conference on Technological Advances of Thin Films & Surface Coatings, ThinFilms2008, 13-16 July, 2008.
2
Pi-Chuen Tsai, Wen-Jauh Chen, Jun-Hao Chen,Chi-Lung Chang, “Deposition and Characterization of TiBCN Films by Cathodic Arc Plasma Evaporation,” The 4th International Conference on Technological Advances of Thin Films & Surface Coatings, ThinFilms2008, 13-16 July, 2008, Singapore.
3
Pi-Chuen Tsai, Jueh-Yu Chiang, Yen-Fei Hwang, Jen-Ching Huang, Jyh-Wei Lee, “Mechanical Properties Evaluation of Titanium-containing Diamond-like Carbon Films Deposited by Cathodic Arc Plasma,” The International Conference on Metallurgical Coatings and Thin Films 2008 (ICMCTF 2008).
4
Chi-Lung Chang, Jun-Han Chen, Pi-Chuen Tsai, Wei-Yu Ho, Da-Yung Wang, “Synthesis and Characterization of Nano-Composite Ti-Si-N Hard Coating by Filtered Cathodic Arc Deposition,” The International Conference on Metallurgical Coatings and Thin Films 2008 (ICMCTF 2008).
5
Chi-Lung Chang, Tsung-Ju Hsieh, Pi-Chuen Tsai, Wei-Yu Ho, Da-Yung Wang, “Synthesis and Characteristics of Ti-Si-C-N Hard Coating by Cathodic Arc Plasma Evaporation,” Sep. 24-29, 2007, Nagasaki, Japan.
Pi-Chuen Tsai, Yen-Fei Hwang, Jueh-Yu Chiang and Wen-Jauh Chen, “The Effects of Deposition Parameters on the Structure and Properties of Titanium-containing DLC Films Synthesized by Cathodic Arc Plasma Evaporation,” Sixth Asian-European International Conference on Plasma Surface Engineering , AEPSE 2007, Sep. 24-29, 2007, Nagasaki, Japan.
8
Chi-Lung Chang, Wei-Chih Chen , Pi-Chuen Tsai, Wei-Yu Ho, Da-Yung Wang, “Characteristics and performance of TiSiN/TiAlN multilayers coating synthesized by cathodic arc plasma evaporation,” The International Conference on Metallurgical Coatings and Thin Films 2007 (ICMCTF 2007), April 23 - 27, Session: BP-40 , San Diego, California, USA. Surface and Coatings Technology, 202 (2007) 987-992. (SCI)
9
Pi-Chuen Tsai, Jyh-Wei Lee, Chi-Lung Chang, “Microstructures and Oxidation Behavior of Aluminized, Pt-aluminized HVOF sprayed CoCrAlY coatings, ” The International Conference on Metallurgical Coatings and Thin Films 2007 (ICMCTF 2007), April 23 - 27, Session: AP-08 , San Diego, California, USA. (NSC 95-2221- E-150-026)
10
Pi-Chuen Tsai, Jiing-Herng Lee,Chi-Lung Chang, “Improving the Erosion Resistance of Plasma-sprayed Zirconia Thermal Barrier Coatings by Laser Glazing, ” The International Conference on Metallurgical Coatings and Thin Films 2007 (ICMCTF 2007), April 23 - 27, Session: A-3-4-12 , San Diego, California, USA., Surface and Coatings Technology, 202 (2007) 719–724. (NSC 95-2216-E-150-026)
11
Pi-Chuen Tsai, Jueh-Yu Chiang and Yen-Fei Hwang, “Characteristics and Mechanical properties of Titanium-containing Diamond Like Carbon Films Deposited by Cathodic Arc Evaporation”, The 3rd International Conference on Technological Advances on Thin Films and surface coatings 2006, Dec. 11-15, 2006, Grand Copthorne Waterfront Hotel, Singapore. J. Nanosci. Nanotechnol., 8 (2007) 1-6. (SCI).
12
Pi-Chuen Tsai, Kuei-Hsien Chen, “Evaluation of Microstructures and Mechanical Properties of Diamond Like Carbon Films Deposited by Filtered Cathodic Arc Plasma”, The 3rd International Conference on Technological Advances on Thin Films and surface coatings 2006, Dec. 11-15, 2006, Grand Copthorne Waterfront Hotel, Singapore. Thin Solid Films (in press), 2007, doi:10.1016/j.tsf.2007.07.060. (SCI).
13
P. C. Tsai, “The Deposition and Characterization of BCN Films by Cathodic Arc Plasma Evaporation,” The fifth Asian-European International Conference on Plasma Surface Engineering , AEPSE 2005, Sep. 12-16, Qingdao city, China, Surface and Coatings Technology, 201 (2007) 5108-5113.
14
P. C. Tsai, J. H. Lee, C. S Hsu,“ Hot Corrosion Behavior of Laser-glazed Plasma-sprayed Yttria-stabilized Zirconia Thermal Barrier Coatings in the Presence of V2O5”, The fifth Asian-European International Conference on Plasma Surface Engineering , AEPSE 2005, Sep. 12-16, Qingdao city, China, Surface and Coatings Technology, 201 (2007) 5143-5147.
15
J. W. Lee, P. C. Tsai, “Hot Corrosion Properties Evaluation of Aluminized Hastelloy X with Different Bond Coatings” The fifth Asian-European International Conference on Plasma Surface Engineering , AEPSE 2005, Sep. 12-16, Qingdao city, China.
16
P. C. Tsai, J.Y. Chiang, Y. F. Hwang, “Microstructure and Mechanical properties of Titanium-containing Diamond Like Carbon Films Deposited by Cathodic Arc Evaporation,”The Third Asian Conference on Chemical Vapor Deposition, November 12-14, Session: D13, 2004, Taipei, Taiwan. (NSC 92-2622-E-150-018-CC3)
17
P. C. Tsai, K. H. Chen“Characterization of BCN Films Deposited by Reactive Cathodic Arc Evaporation,” The International Conference on Metallurgical Coatings and Thin Films 2004 (ICMCTF 2004), April 19 - 23, Session: D1-2-10 , San Diego, California, USA.
18
P. C. Tsai, J.Y. Chiang, Y. F. Hwang and W. J. Chen,“Characterization of Titanium-containing Diamond Like Carbon Films Deposited by Cathodic Arc Evaporation,” The International Conference on Metallurgical Coatings and Thin Films 2004 (ICMCTF 2004), April 19 - 23, Session: DP-12 , San Diego, California, USA. (NSC 92-2622-E-150-018-CC3)
19
P. C. Tsai, K. H. Chen,C. M. Sung, “Microstructure and Properties of Diamond Like Carbon Films Deposited by Cathodic Arc Evaporation,” The International Conference on Metallurgical Coatings and Thin Films 2003 (ICMCTF 2003), April 28 - May 2, Session:D2-1-6, San Diego, California, USA. (NSC 90-2626-E-150-006)
20
C. S. Hsu, P. C. Tsai, “Improving The High Temperature Corrosion Resistance of Plasma-sprayed Zirconia/MCrAlY Thermal Barrier Coatings by Laser Glazing,”Advanced Manufacturing Technologies and Education (AMTE) 2002, August 11-14, National Chung Cheng University, Chia-Yi, Taiwan, A120. (NSC 90-2216-E-150-002)
21
P. C. Tsai, C. S. Hsu, “High Temperature Corrosion Resistance and Microstructural Evaluation of Laser-glazed Plasma-sprayed Zirconia/MCrAlY Thermal Barrier Coatings,” International Conference on Metallurgical Coatings and Thin Films 2002 (ICMCTF 2002), April 22-26, Session:A3-1-5, San Diego, California, USA. (NSC 90-2216-E-150-002)
22
Chen-Sheng Hsu, Pi-Chuen Tsai, Kuan-Hong Lin, and Shun-Tian Lin, "Tungsten Heavy Alloys in the Incipient Stage of Liquid Phase Sintering", 2000 International Conference on Powder Metallurgy & Particulate Materials, May 30-June 3, 2000, New York Metal Powder Industries Federation, APMI International.
23
L. C. Liu, P. C. Tsai, H. L. Tsai, 1992, "The Microstructure of laser Glazed Plasma Syprayed Ceramic Coating," in Proceeding of National Conference on Welding Technology, Taipei, Taiwan, pp. 79-84.
24
P. C. Tsai, H. L. Tsai, David C. Tu, 1992, "Laser Glazing of Plasma Sprayed Thermal Barrier coating and Its Effect on High Temperature Cyclic Oxidation Behaviour," in Proceedings of the 1992 Annual Conference of the Chinese for materials Science, Chinese Society for Material Science, Taipei, Taiwan, R.O.C., pp. 576-577.
25
P. C. Tsai, H. L. Tsai, David C. Tu, 1992, "Effect of ProcessingParameters on Laser Glazing of Plasma Sprayed Yttria Stabilized Zirconia," in Laser Advanced Materials Processing LAMP’92, edited by A. Matsunawa and S. Katayama, High Temperature Society of Japan, Osaka, Japan, pp.877-882