Experiencess  &  Specialty

Education

B. S. Department of Materials Science & Engineering,National  Cheng Kung University, Taiwan, 1995~1999.

M. S. Department of Materials Science & Engineering, National Cheng Kung University, Taiwan, 1999~2001.

Ph. D., Department of Materials Science & Engineering, National Cheng Kung University, Taiwan, 2001~2006.

Expertise and Research Interests

Biomaterials, Light-metals, Surface technologies, Mechanical

properties, Failure mechanism.

Experiencess

Department of Materials Science & Engineering,National  Formosa University，Assistant Professor

National Cheng Kung University，Center for Light Metal，Postdoctoral Fellow

曾執行之計畫（國科會及各種產學計畫）

補助或委託機構

起迄年月

計畫名稱(計畫編號)

略

略

略

Publication

Journal Papers

1

Chung-Wei Yang, Truan-Sheng Lui, Tzer-Min Lee and Edward Chang. “Effect of hydrothermal treatment on microstructural feature and bonding strength of plasma-sprayed hydroxyapatite on Ti-6Al-4V”. Materials Transactions. 45(9) (2004) 2922-2929.

2

Chung-Wei Yang, Tzer-Min Lee, Truan-Sheng Lui and Edward Chang. “A comparison of the microstructural feature and bonding strength of plasma-sprayed hydroxyapatite coatings with hydrothermal and vacuum post-heat treatment”. Materials Transactions. 46(3) (2005) 709-715.

3

Chung-Wei Yang, Tzer-Min Lee, Truan-Sheng Lui and Edward Chang. “Effect of post vacuum heating on the microstructural feature and bonding strength of plasma-sprayed hydroxyapatite coatings”. Materials Science and Engineering C. 26 (2006) 1395-1400.

4

Chung-Wei Yang and Truan-Sheng Lui. “Effect of crystallization on the bonding strength and failures of plasma-sprayed hydroxyapatite”. Materials Transactions. 48(2) (2007) 211-218.

5

Chung-Wei Yang, Truan-Sheng Lui and Edward Chang. “Low temperature crystallization and structural modification of plasma-sprayed hydroxyapatite coating with hydrothermal treatment”. Advanced Materials Research. 15-17 (2007) 147-152.

6

Chyun-Yu Yang, Tzer-Min Lee, Chung-Wei Yang, Lih-Ren Chen, Ming-Che Wu and Truan-Sheng Lui. “The in vitro and in vivo biological responses of plasma-sprayed hydroxyapatite coatings with post-hydrothermal treatment”. Journal of Biomedical Materials Research: Part A. 83(2) (2007) 263-271.

7

Chung-Wei Yang and Truan-Sheng Lui. “Reliability evaluation of hydrothermal crystallization on plasma-sprayed HA coatings by the Weibull model”. Key Engineering Materials. 345-346 (2007) 1389-1392.

8

Chung-Wei Yang and Truan-Sheng Lui. “Statistical analysis on bonding strength and failure mechanism of plasma-sprayed HA coating with reinforced intermediate layers”. Advanced Materials Research. 47-50 (2008) 1007-1010.

9

Chung-Wei Yang and Truan-Sheng Lui. “The self-healing effect of hydrothermal crystallization on the mechanical and failure properties of hydroxyapatite coatings”. Journal of the European Ceramic Society. 28 (2008) 2151-2159.

10

Gung-An Lan, Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “The Weibull statistical analysis for evaluating microstructural effects on electrification-fusion phenomenon of Sn-xZn alloys”. Journal of Alloys and Compounds. 475 (2009) 294-299.

11

Chung-Wei Yang, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jiun-Yu Juo. “Weibull statistics for evaluating failure behaviors and joining reliability of friction stir spot welded 5052 aluminum alloys”. Materials Transactions. 50(1) (2009) 145-151.

12

Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Hydrothermal crystallization effect on the improvement of erosion resistance and reliability of plasma-sprayed hydroxyapatite coatings”. Thin Solid Films. 517 (2009) 5380-5385.

13

Chung-Wei Yang and Truan-Sheng Lui. “Kinetics of hydrothermal crystallization under saturated steam pressure and self-healing effect by nano-crystallite for hydroxyapatite coatings”. Acta Biomaterialia. 5 (2009) 2728-2737.

14

Chung-Wei Yang, Truan-Sheng Lui, Li-Hui Chen and Hau-En Hung. “Tensile mechanical properties and failure behaviors with the ductile-to-brittle transition effect of a+b-type Mg-Li-Al-Zn alloy”. Scripta Materialia. 61 (2009) 1141-1144.

15

Chung-Wei Yang and Truan-Sheng Lui. “Microstructural healing with interfacial reaction layers on the adhesive strength enhancement of plasma-sprayed hydroxyapatite coatings”. International Journal of Modern Physics B (IJMPB). 24 (2010) 76-84.

16

Chung-Wei Yang, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jan-Hung Huang. “Effect of aging and reversion treatments on tensile properties of friction stir processed 7075 aluminum alloy”. Accepted by Key Engineering Materials. (2010).

1

楊崇煒, 周邦彥, 張煥修. “添加氧化鋯對電漿熔射氫氧基磷灰石塗層相變化的影響”, 中國材料科學學會年會, 2001年11月23-24日, 中興大學, 台中.

2

楊崇煒, 李澤民, 呂傳盛, 張煥修. “水熱處理對電漿熔射氫氧基磷灰石塗層之微結構與鍵結強度的影響”, 中國材料科學學會年會, 2004年11月17-18日, 清華大學, 新竹.

3

楊崇煒, 李澤民, 呂傳盛, 張煥修. “真空熱處理之電漿熔射氫氧基磷灰石塗層性質及可靠度工程解析”, 中國材料科學學會年會, 2005年11月25-26日, 淡江大學, 台北.

4

楊崇煒, 呂傳盛, 張煥修. “引入不同介層之電漿熔射氫氧基磷灰石複合塗層之破壞模式探討”, 中國材料科學學會年會, 2005年11月25-26日, 淡江大學, 台北.

5

楊崇煒, 呂傳盛, 張煥修. “加熱氛圍效應對電漿熔射氫氧基磷灰石塗層之結晶化及結合強度的影響探討” (榮獲論文佳作獎), 94年度中華民國生醫材料暨藥物制放研討會, 2005年11月26日, 清華大學, 新竹.

6

李澤民, 楊崇煒, 呂傳盛, 呂穎智, 楊詩屏, 葉郁仁. “水熱處理電漿熔射氫氧基磷灰石鍍層於模擬體液中之塗層性質變化”, 94年度中華民國生醫材料暨藥物制放研討會, 2005年11月26日, 清華大學, 新竹.

7

李澤民, 楊崇煒, 呂穎智, 楊詩屏. “諸變因氫氧基磷灰石鍍層/鈦合金材料於模擬體液中之變化及骨細胞反應研究”, 2005中華民國醫學工程學會年會暨學術研討會, 2005年12月, 中壢.

8

楊崇煒, 呂傳盛. “電漿熔射氫氧基磷灰石塗層之低溫水熱法結晶化效應”, 中國材料科學學會年會, 2006年11月24-25日, 成功大學, 台南.

9

呂穎智, 楊崇煒, 李澤民, 呂傳盛, 吳侑峻, 黃譯賢. “電漿熔射氟基磷灰石鍍層披覆於鈦合金基材之研究”, 中國材料科學學會年會, 2006年11月24-25日, 成功大學, 台南.

10

楊崇煒, 呂傳盛. “後熱處理及引入強化層方式對氫氧基磷灰石塗層結合強度之效應與破壞機制探討”, 2006生物醫學工程科技研討會暨國科會醫學工程學門成果發表會, 2006年12月15-16日, 台灣大學, 台北.

11

蔡原宗, 楊崇煒, 呂傳盛, 陳立輝. “摩擦攪拌製程對AZ61鎂合金高溫拉伸特性之影響”, 中國材料科學學會年會, 2007年11月16-17日, 交通大學, 新竹.

12

陳博彥, 楊崇煒, 呂傳盛, 陳立輝. “熱處理前後20 mm細微銅導線之組織與拉伸特性”, 中國材料科學學會年會, 2007年11月16-17日, 交通大學, 新竹.

13

莊惟智, 楊崇煒, 呂傳盛, 陳立輝. “5083-O鋁合金經摩擦攪拌改質之高溫拉伸機械性質測試”, 中國材料科學學會年會, 2007年11月16-17日, 交通大學, 新竹.

14

蕭志臻, 楊崇煒, 陳立輝, 呂傳盛. “高電流通電對於7075鋁合金變形阻抗及微觀組織之影響”, 中國材料科學學會年會, 2007年11月16-17日, 交通大學, 新竹.

15

楊崇煒, 蔡原宗, 呂傳盛, 陳立輝. “AZ61鎂合金經摩擦攪拌製程改質之高溫拉伸特性研究”, 臺灣鎂合金協會2008年年會暨論文發表會, 2008年1月4日, 台北福華國際文教會館, 台北. (鎂合金產業通訊, 44期, 98年2月, 47-53).

16

楊崇煒, 張云瀚, 呂傳盛, 陳立輝. “Al-Si (-Mg)合金沖蝕磨耗特性之摩擦攪拌改質與時效效應研究”, 中國材料科學學會年會, 2008年11月21-22日, 台北科技大學, 台北.

17

許育甄, 楊崇煒, 呂傳盛, 陳立輝. “無鉛銲錫/銅基材界面接合強度及破壞面組織解析”, 中國材料科學學會年會, 2008年11月21-22日, 台北科技大學, 台北.

18

洪浩恩, 楊崇煒, 呂傳盛, 陳立輝. “LAZ1142鎂合金經摩擦攪拌製程後銲道微結構和硬度變化探討”, 中國材料科學學會年會, 2008年11月21-22日, 台北科技大學, 台北.

19

許育甄, 楊崇煒, 呂傳盛, 陳立輝. “熱處理時間對無鉛銲錫/銅基材界面接合強度及破壞面組織效應探討”, 金屬熱處理學會年會, 2008年12月6日, 逢甲大學, 台中.

20

洪浩恩, 楊崇煒, 呂傳盛, 陳立輝. “LAZ1142擠型鎂合金之室溫至高溫拉伸機械性質探討”, 金屬熱處理學會年會, 2008年12月6日, 逢甲大學, 台中.

21

張云瀚, 楊崇煒, 陳立輝, 呂傳盛. “A4032鋁合金鑄造材經摩擦攪拌及人工時效處理後之沖蝕磨耗性質探討”, 金屬熱處理學會年會, 2008年12月6日, 逢甲大學, 台中.

22

楊崇煒, 洪浩恩, 呂傳盛, 陳立輝. “(a + b)雙相Mg-Li-Al-Zn合金抗拉特性之延-脆轉換效應探討”, 臺灣鎂合金協會2009年年會暨論文發表會, 2009年6月26日, 大同大學, 台北.

Invited publication for a chapter paper

1

Chung-Wei Yang and Truan-Sheng Lui. “Chapter 10: Crystallization effect on bonding strength and failure mechanism of plasma-sprayed hydroxyapatite coatings”. Invited publication in Biomimetic and Supramolecular Systems Research, editor: Arturo H. Lima. Nova Science Publishers Inc., Hauppauge, New York, (Pub. Date: 2008, ISBN: 978-1-60456-405-1).

2

Chung-Wei Yang, Chien-Chih Chou and Truan-Sheng Lui. “Chapter 5: Effect of Ag/In Additives and crystallization kinetics on the resistive characteristics of amorphous SbTe Chalcogenide films”. Invited publication in Nanopowders and Nanocoatings: Processes, Properties and Applications, editor: V. F. Cotler. Nova Science Publishers Inc., Hauppauge, New York, (Pub. Date: 2009, 4th quarter, ISBN: 978-1-60741-940-2).

3

Chung-Wei Yang and Truan-Sheng Lui. “Section 1: Processing and Characterization of the Bio Coatings, Chapter 6: Hydrothermal self-healing effect on bonding reinforcement and failure mechanism of plasma-sprayed hydroxyapatite coatings”. Invited publication in CRC Handbook of Biological and Biomedical Coatings (accepted), editor: Prof. Sam Zhang. CRC Press Inc., Boca Raton, Florida, (Pub. Date: 2010, 2nd quarter).

技術報告及其他

略

Other Activities

1

2006年中國材料科學學會年會，擔任得獎論文審查組籌備人員

1

Chung-Wei Yang, Tzer-Min Lee, Truan-Sheng Lui and Edward Chang. “Effect of post vacuum heating on the microstructural feature and bonding strength of plasma-sprayed hydroxyapatite coatings”. TMS 2005 134th Annual Meeting and Exhibition, February 13 to 17, 2005. San Francisco, CA, America.

2

Chung-Wei Yang, Truan-Sheng Lui and Edward Chang. “A three-parameter Weibull distribution analysis on the bonding strength of plasma-sprayed HA coatings with hydrothermal treatment”. The 4th Asia-Pacific International Symposium on the Basics and Applications of Plasma Technology, December 12 to 14, 2005. Douliou, Yunlin, Taiwan, R.O.C.

3

Chung-Wei Yang, Truan-Sheng Lui and Edward Chang. “Low temperature crystallization and structural modification of plasma-sprayed hydroxyapatite coating with hydrothermal treatment”. THERMEC’ 2006 International Conference on Processing and Manufacturing of Advanced Materials, July 4 to 8, 2006. Vancouver, BC, Canada.

4

Chung-Wei Yang and Truan-Sheng Lui. “Hydrothermal Healing Effect and the Reinforced Intermediate Layers on Improving the Bonding Strength of Plasma-Sprayed Hydroxyapatite Coatings”. TMS 2007 136th Annual Meeting and Exhibition, February 25 to March 1, 2007. Orlando, FL, America.

5

Chung-Wei Yang and Truan-Sheng Lui. “Reliability Evaluation of Hydrothermal Crystallization on Plasma-Sprayed HA Coatings by the Weibull Model”. 10th International Conference on the Mechanical Behavior of Materials, May 27 to 31, 2007, BEXCO, Busan, Korea.

6

Chung-Wei Yang, Chih-Hsien Wang and Truan-Sheng Lui. “Effect of Heat Treatment on the Charge-Discharge Capacity of LiMn₂O₄ Cathode Material”. International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications, November 4 to 7, 2007, Howard Beach Resort Kenting Henhchun Town, Pingtung, Taiwan, R.O.C.

7

Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Erosion resistance and reliability of plasma-sprayed hydroxyapatite coatings with hydrothermal crystallization”. The 4th International Conference on Technological Advances of Thin Films & Surface Coatings (Thin Films 2008), July 13 to 16, 2008, Singapore.

8

Chung-Wei Yang and Truan-Sheng Lui. “Statistical analysis on bonding strength and failure mechanism of plasma-sprayed HA coating with reinforced intermediate layers”. International Conference on Multifunctional Materials and Structures, July 28 to 31, 2008, Hong Kong, China.

9

Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Effect of aging treatments on microstructure and mechanical properties of friction stir processed 7075 aluminum alloy”. TMS 2009 138th Annual Meeting and Exhibition, February 15 to 19, 2009. San Francisco, CA, America.

10

Chung-Wei Yang, Truan-Sheng Lui and Chien-Chih Chou. “Influence of crystallization on sheet resistivity associated with the size effect of AgInSbTe chalcogenide films”. TMS 2009 138th Annual Meeting and Exhibition, February 15 to 19, 2009. San Francisco, CA, America.

11

Chung-Wei Yang, Truan-Sheng Lui and Edward Chang. “Microstructural healing with interfacial reaction layers on the adhesive strength enhancement of plasma-sprayed hydroxyapatite coatings”. International Conference on Materials for Advanced Technologies (ICMAT 2009), June 28 to July 3, 2009, Singapore.

12

Yu-Chen Hsu, Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Effect of interfacial IMCs on the adhesive strength and failure behaviors for the SAC305/Cu joint with a solid-state bonding process”. International Conference on Materials for Advanced Technologies (ICMAT 2009), June 28 to July 3, 2009, Singapore.

13

Yun-Han Chang, Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Effect of friction stir processing and following T6 artificially aging hardening on the improving of erosion resistance of casting A384 aluminum alloy”. International Conference on Materials for Advanced Technologies (ICMAT 2009), June 28 to July 3, 2009, Singapore.

14

Chung-Wei Yang, Yu-Chen Hsu, Truan-Sheng Lui and Li-Hui Chen. “Effect of heat treatment on the interfacial adhesive strength and the failure behaviors of SAC305/Cu with a solid-state bonding process”. THERMEC’ 2009 International Conference on Processing and Manufacturing of Advanced Materials, August 25 to 29, 2009. Berlin, Germany.

15

Chung-Wei Yang, Hau-En Hung, Truan-Sheng Lui and Li-Hui Chen. “The study of tensile mechanical properties of LAZ1142 extruded magnesium-lithium alloy at elevated temperatures”. THERMEC’ 2009 International Conference on Processing and Manufacturing of Advanced Materials, August 25 to 29, 2009. Berlin, Germany.

16

Chung-Wei Yang and Truan-Sheng Lui. “Tensile properties with the ductile-to-brittle transition and friction stir processing of the a+b-type Mg-Li-Al-Zn alloy”. The 4th Pan-Yellow Sea Rim Symposium on Magnesium Alloys, November 12 to 13, 2009. Kumamoto, Japan.

17

Chih-Hsien Wang, Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “A study on the electrochemical characteristics of AlF₃-coated LiMn₂O₄ cathode materials by the hydrothermal method”. TACT 2009 International Thin Films Conference, December 14 to 16, 2009. Taipei, Taiwan, R. O. C.

18

Chung-Wei Yang, Truan-Sheng Lui and Li-Hui Chen. “Tensile mechanical properties and the ductile-to-brittle transition behavior of the Mg-Li-Al-Zn alloy”. TMS 2010 139th Annual Meeting and Exhibition, February 14 to 18, 2010. Seattle, WA, America.

19

Chung-Wei Yang, Truan-Sheng Lui, Li-Hui Chen and Yun-Han Chang. “Effect of friction stir processing (FSP) on particle erosion resistance of casting A384 aluminum alloy”. TMS 2010 139th Annual Meeting and Exhibition, February 14 to 18, 2010. Seattle, WA, America.

20

Chung-Wei Yang, Fei-Yi Hung, Truan-Sheng Lui, Li-Hui Chen and Jan-Hung Huang. “Effect of aging and reversion treatments on tensile properties of friction stir processed 7075 aluminum alloy”. 9th International Conference on Fracture and Damage Mechanics, September 20 to 22, 2010. Nagasaki, Japan.

Academic Groups

略

Academic Awards

1

於94年度中華民國生醫材料暨藥物制放研討會中發表：

“加熱氛圍效應對電漿熔射氫氧基磷灰石塗層之結晶化及結合強度的影響探討”榮獲論文佳作獎  ((九十四)生藥獎字第009號)。

Supplements

1

成功大學貴重儀器中心FESEM操作合格證書(成大貴儀證字第931027號)